Skip to main content
FREE Delivery!|(385) 360-1334

Sanpete County, Utah ยท Free Delivery

Large River Rock and Bulk Aggregates for Chester, UT

Free delivery to Chester on every order, with loads arriving in as fast as 2 business days.

Delivering to Chester, UT

Free delivery on every order.

  • Free delivery to Chester
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Chester

Crushed gravel and base materials that compact under tires.

Road Base

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Chester

Rock & Stone delivered to Chester

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Chester

Decorative delivered to Chester

Rounded stone for beds, borders and water features.

Sand delivered to Chester

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Chester

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Chester works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Chester.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Chester addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Looking for gravel and aggregate delivery in Chester, UT? Utah Rock Supply brings bulk material to your site, from untreated base course under a new pad to the coarse stone that holds a bank in place.

Sanpete Valley ground is alkaline, and the irrigated floors hold silt and clay that drain slowly. That shapes what you order before anything else does.

Materials for Chester Projects

Slope, swale and bank protection starts with coarse, clean stone. In the high plateau valleys, spring snowmelt and short hard summer storms move water fast down the washes and ditch banks.

Stone that locks together and stays put is what holds that edge.

RipRap is the heavy armor for wash banks, culvert outlets and irrigation ditch edges. Large River Rock, sold as 4 to 6 inch cobble, covers swales and dry creek beds where runoff would move a smaller stone.

Railroad Ballast handles hard standing and severe drainage where nothing finer will stay. #4 Crushed Stone sits under trench bottoms and construction entrances.

Drainage below the surface is a different job. Drain Rock, which Utah yards also call washed rock or 3/4 inch washed rock, is the clean stone for French drains, footing and foundation drains, window wells and drywells.

Where the ground is gypsum bearing or salty, water left standing against a slab or footing can soften and settle it, so the drainage layer matters as much as the stone on the bank.

Delivery to Chester and the Surrounding Area

You order online, pick a quantity by the ton or by the yard, and choose your delivery date at checkout. A dump truck then tips the load on your site in one pile.

Utah Rock Supply delivers bulk material across Sanpete County, including Chester, Ephraim, Mount Pleasant, Manti, Fairview and Wales. Each product page carries a calculator if you want help sizing the load.

Have the drop spot clear before the truck arrives, with room for the bed to tip and pull away. If you are placing fill first, get the grade set so the base course is not sitting on soft ground.

Ground and Conditions in Chester

This is a short high-valley season. Ground freezes from late autumn into spring, so base, drive and flatwork go in between.

Across the Sanpete, Sevier and the high plateau valleys, irrigated valley clay stays wet and drains slowly. Plan drainage before you place anything on top of it.

Frozen ground also means timing a delivery to a workable window matters more here than the material choice itself.

Hard winter freeze and frost heave work on gravel drives and county roads in these valleys. Building officials set footing depth locally, and in the mountain valleys to the north a figure of 36 inches is used, while 48 inches belongs to Brian Head on the plateau.

Confirm your figure with the building official before you plan any footing work.

Questions Chester Buyers Ask

What stone should I use for drainage in Chester?

Use clean, washed stone so water moves through instead of sitting in fines. Drain Rock, also called washed rock or 3/4 inch washed rock, is the standard choice for French drains, footing drains and window wells.

For a swale or bank that carries runoff, go coarser with RipRap or Large River Rock. Keep the drainage stone clean and separate from any fines-bearing material.

What should I have ready when the truck arrives?

Clear the drop spot, leave room for the truck to tip its load and pull away, and make sure the ground where the pile lands can take the weight. The truck tips the material in one pile on site.

If you are building up grade, set the fill and grade before the base course goes down, so the load lands where the work is.

Order Bulk Gravel and Stone in Chester

Utah Rock Supply delivers bulk gravel, sand, topsoil and coarse stone to Chester and the surrounding Sanpete County area. Pick your material, set your quantity by the ton or yard, and choose a delivery date at checkout.

Order online when your site is ready.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Chester, UT

What stone should I use for drainage in Chester?

Use clean, washed stone so water moves through instead of sitting in fines. Drain Rock, also called washed rock or 3/4 inch washed rock, is the standard choice for French drains, footing drains and window wells. For a swale or bank that carries runoff, go coarser with RipRap or Large River Rock. Keep the drainage stone clean and separate from any fines-bearing material.

What should I have ready when the truck arrives?

Clear the drop spot, leave room for the truck to tip its load and pull away, and make sure the ground where the pile lands can take the weight. The truck tips the material in one pile on site. If you are building up grade, set the fill and grade before the base course goes down, so the load lands where the work is.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.