#89 Crushed Stone in Utah
Rather than remaining loose and open, #89 Crushed Stone compacts to a close finish in Utah paver joints and flagstone work.
- Size: About 3/8 inch down to fines
- Grading: #89, carries some fines
- Type: Angular crushed stone
From $436 for 1 ton, delivery included (larger loads cost significantly less per ton)
Free delivery included
Free delivery anywhere in Utah
Pick a delivery date
Weekday delivery, earliest Nov 3
Get a Free Quote
Fill out the form and our sales team will get back to you within the hour.
Everything You Need to Know About #89 Crushed Stone
Size and Grading
- Size
- About 3/8 inch down to fines
- Grading
- #89, carries some fines
- Type
- Angular crushed stone
Snowmelt on old lakebed clay can change site conditions quickly along the Wasatch Front, while gravelly benches may shed water too readily. #89 Crushed Stone has fines that help its angular crushed pieces settle into a tighter finish. It is suited to confined hardscape areas, not to an open drainage layer intended to move water through the site. That distinction matters where spring moisture and soil movement affect the preparation below a finished surface.
After the supporting layer is prepared, work this material into paver gaps or use it for flagstone setting, then compact it for a firm result. This placement keeps the close-fitting aggregate in the part of the project where it performs as intended. #89 Crushed Stone can also be selected for chip-seal surface work or a concrete mix requiring compactable fine aggregate.
Quickly Calculate How Much You Need
Material: #89 Crushed Stone
How to Measure
Measure the length and width of your project area in feet
Decide on depth in inches (2" for landscaping, 4" for driveways)
Enter the values above and we'll calculate the tonnage you need
Need help figuring out the right amount? We can help!
Call or text us at (385) 360-1334 and we'll help you calculate the right quantity for your project.
Not sure how much you need? The Stone Calculator has depth guides, coverage charts and worked examples for this material.
Common Uses
Filling Paver and Flagstone Gaps
Brush it between the pieces to help keep pavers from shifting.
Chip Seal Road Work
The fine, angular particles adhere effectively in chip-and-seal applications.
Small Aggregate for Concrete
Choose this fine coarse aggregate when the mix calls for a smaller stone.
Walkway Bedding
Set paver or stone paths on a level, supportive layer.
Why Choose #89 Crushed Stone
Tight Compaction
Fine material in the blend helps create a dense, firm surface.
Versatile
Use it for joint fill, path bases, concrete, or chip-seal work.
Clean Finish
The small, even stone size creates a tidy appearance.
Easy to Place
You can distribute it and brush it into narrow gaps with little effort.
