3/8" Crushed Stone in Utah
At the surface stage of a Utah patio or driveway build, 3/8" Crushed Stone compacts into a clean, even layer after the support work is done.
- Size: Approximately 3/8 inch
- Type: Angular crushed stone
From $408 for 1 ton, delivery included (larger loads cost significantly less per ton)
Free delivery included
Free delivery anywhere in Utah
Pick a delivery date
Weekday delivery, earliest Nov 3
Get a Free Quote
Fill out the form and our sales team will get back to you within the hour.
Everything You Need to Know About 3/8" Crushed Stone
Size and Grading
- Size
- Approximately 3/8 inch
- Type
- Angular crushed stone
A contractor can use 3/8" Crushed Stone near the visible end of the build, once grade, runoff planning, and underlying support are established. Its angular pieces pack together to form a dense surface with a smooth appearance. That makes it useful for patios, garden paths, and driveway finishes where the surface needs to feel more comfortable underfoot than coarser stone.
Along the Wasatch Front, snowmelt can affect clay ground, while bench areas may shed water quickly through gravelly soil. Both conditions call for attention to the base and drainage before the exposed stone goes down. On a patio or drive, place this material only after the lower layer has been prepared for the site, then compact it to settle the particles together. 3/8" Crushed Stone can provide a tidy final surface without taking on the separate job of supporting swelling or shifting ground.
Quickly Calculate How Much You Need
Material: 3/8" Crushed Stone
How to Measure
Measure the length and width of your project area in feet
Decide on depth in inches (2" for landscaping, 4" for driveways)
Enter the values above and we'll calculate the tonnage you need
Need help figuring out the right amount? We can help!
Call or text us at (385) 360-1334 and we'll help you calculate the right quantity for your project.
Not sure how much you need? The Stone Calculator has depth guides, coverage charts and worked examples for this material.
Common Uses
Paths & Patio Areas
With its fine 3/8-inch grading, this stone feels more even underfoot on garden trails, side paths, and patios. After compaction, it leaves a tidy, consistent finish.
Finished Driveway Layer
For the final course of a driveway, spread 3/8-inch crushed stone on top of a base built with larger rock. The finer material settles into the gaps below, leaving the surface more even and finished.
Support for Pipe & Utilities
Place 3/8-inch crushed stone around pipe, conduit, and utility work for even bedding. Its uniform, small pieces move around uneven forms while giving them steady support.
Stone Landscape Cover
Cover planting areas, tree rings, and border edges with 3/8-inch crushed stone. Its small texture gives garden spaces a neat, finished stone surface, including xeriscape rock yards.
Why Choose 3/8" Crushed Stone
A Softer Surface Underfoot
With 3/8-inch pieces, this aggregate feels smoother to walk on than larger rock. It works well for paths, patios, and spots where bare feet are common.
Dense Packed Layer
Compaction draws 3/8-inch crushed stone into a close-fitting, dense layer. That layer is less likely to move with foot traffic or changing weather.
Flexible Size Range
At 3/8-inch, this aggregate falls between screenings and typical larger crushed rock. Use it for finish layers, utility bedding, or landscape work where coarser material is not a good fit.
Uniform Angular Finish
Small angular pieces of 3/8-inch crushed stone give landscape and hardscape projects a clean, orderly appearance.
